SongteMachine
250m Машина для бурения скважин на воду, установленная на грузовике (SW-250T)
1. SW-250T Truck Mounted Water Well Drilling Machine is hydraulic power head drilling rig, it is a multifunctional, full-hydraulic, high-torque, water-gas dual-purpose hydraulic power head drilling rig that we completely independently developed. It is mainly used for drilling drinking water wells, Скважины для орошения сельскохозяйственных угодий, industrial production wells, геотермальные скважины, hydrogeological wells, road and bridge engineering pile holes and other projects.
2. The structure of this hydraulic power head drilling rig is stable and reasonable. The power head on the top of the drill tower can maximize the verticality of the drilling hole. The operation is simple, the time to replace the drill pipe is short, and manpower is saved.
3. The hydraulic power head of the drilling rig has large torque and is suitable for large diameter drilling engineering. The large flow mud pump, air compressor and foam pump are all installed on the same chassis. According to different geological conditions, suitable drilling technologies can be selected, such as mud positive circulation, pneumatic down the hole hammer, hydraulic down the hole hammer, air lift reverse circulation, и так далее.
4. The drilling rig can be equipped with hydraulic truck crane, automatic loading and unloading drill pipe device, electric welding machine, generator, и так далее. as required by customers.
SW-250T Truck Mounted Water Well Drilling Machine Technical Parameters:
| Comprehensive overview | |
| Depth：250m Hole diameter：100-500миллиметр Размеры；12000mm×2500mm×4150mm Общий вес：12500кг Drilling technology can be used: mud positive circulation, DTH-hammer, air lift reverse circulation, Mud DTH-hammer. |
|
| Truck Chassis | Truck chassis brand: SINO TRUCK Driving form：6×4 Сила：290Л.С. |
| Drilling tower Truss type | Drill tower load:20T Operation: Two hydraulic support cylinders Drill tower height：12M |
| Pull up-Pull down cylinder Cylinder-wire rope structure | Pull down: 7T Pull up: 15T |
| Second floor chassis Connecting drill rig and truck chassis | Brace: Four hydraulic leg cylinders Equipped with hydraulic lock to prevent leg retraction |
| Дизель | Сила:120КВТ Тип: Six Cylinders, Water Cooling and Mechanical Supercharging Revolutions:1800R/MIN |
| Diesel Engine Monitor Matching | Monitoring information such as speed, temperature and so on through diesel engine sensors |
| HoistZYJ1B | Single rope pull up：1T |
| Hydraulic power head | Revolutions：0-150Оборотов в минуту Вращающий момент：7500NM |
| AlternatorSTC-30KW | Номинальная мощность：30КВТ Rated Current:72.2A Rated Speed：1500Оборотов в минуту |
| Foam pump and oil filling device B-36EX1 | Течь：42L/MIN Давление：4MPA Revolutions：660R/MIN Improving the up-and-down efficiency of drilling cuttings, cooling and lubricating the impactor |
| Control box | Integrated console Lifting and boring tower, outrigger cylinder, lifting, lowering, power head clutch, power head shifting, и так далее. Instrument: drilling tool weight gauge, system pressure gauge, и так далее. |
