songtemachine
350m Truck Mounted Water Well Drilling Rig With Air Compressor (SW-350TA)
SW-350TA truck-type water well drilling rig is powerful, efficient, multi-purpose drilling equipment, which can use air, foam or mud rotary for percussive drilling according to different textures. It is widely used in industrial and agricultural water conservancy projects, such as drilling wells, testing wells or other exploration boreholes, in particular, in drilling hole for geothermal heating it can also meet the engineering basis for reinforcement, loose gravel drilling rock formation connected with a variety of engineering requirements.
This truck mounted water well drilling rig could achieve both air DTH hammer drilling and mud drilling. Its centralized control console is suitable for more comprehensive manipulation. Rapid pulling and lifting reduce the auxiliary time and enhance the working efficiency. The truck chassis is the basis for the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, and feed system. This machine is produced through strict processing with advanced technology and machine, so it can provide you most reliable and stable performance. It is also equipped with various kinds of safety settings, thus preventing accidents from happening.
SW-350TA Truck Mounted Water Well Drilling Rig Technical Parameters:
|
Model |
SW-350TA |
|
Bore diameter(mm) |
115-350 |
|
Bore depth(m) |
350 |
|
Walk speed(km/h) |
0-2.5 |
|
For rock(F) |
6-20 |
|
Air pressure(Mpa) |
1.05-3.5 |
|
Air consumption(m³/min) |
16-35 |
|
Once promotion(mm) |
3600 |
|
Skid max angle(°) |
90 |
|
Maximum height from the ground(mm) |
320 |
|
Rotation Speed(r/min) |
0-110 |
|
Rotation torque(NM) |
5600 |
|
Lifting power(T) |
15 |
|
Lifting speed(m/min) |
27 |
|
Climb ability(°) |
25 |
|
Dimension(L*W*H)(mm) |
6500*2100*2600 |
|
weight(Kg) |
9400 |
SW-350TA Truck Mounted Water Well Drilling Rig Boreholes Worksite:
